Wednesday, 30 March 2011 15:40

Accident Sequence Models

Rate this item
(5 votes)

This article covers a group of accident models that all share the same basic design. The interplay between human, machine and environment, and the development of this interplay into potential hazards, dangers, damages and injuries, is envisaged by means of a sequence of questions derived and listed in a logical order. This sequence is then applied in a similar manner at different levels of analysis through the use of models. The first of these models was presented by Surry (1969). A few years later, a modified version was presented by the Swedish Work Environment Fund (1983) and received the fund’s sobriquet, WEF. A Swedish research team then evaluated the WEF model and suggested some further developments resulting in a third model.

These models are herein described one by one, with comments on the reasons for the changes and developments undertaken. Finally, a tentative synthesis of the three models is proposed. Thus, a total of four models, with considerable similarities, are presented and discussed. Although this may seem confusing, it illustrates the fact that there is no model that is universally accepted as “The Model”. Among other things, there is an obvious conflict between simplicity and completeness with regard to accident models.

Surry’s Model

In 1969, Jean Surry published the book Industrial Accident Research—A Human Engineering Appraisal. This book contains a review of models and approaches predominantly applied in accident research. Surry grouped the theoretical and conceptual frameworks she identified into five different categories: (1) chain-of-multiple-events models, (2) epidemiological models, (3) energy-exchange models, (4) behaviour models, and (5) systems models. She concluded that none of these models is incompatible with any of the others; each simply stresses different aspects. This inspired her to combine the various frameworks into one comprehensive and general model. She made it clear, though, that her model should be regarded as provisional, without any pretensions of finality.

In Surry’s view, an accident can be described by a series of questions, forming a sequential hierarchy of levels, where the answers to each question determine whether an event turns out as an accident or not. Surry’s model (see figure 1) reflects the principles of human information processing, and is based upon the notion of an accident as a deviation from an intended process. It has three principal stages, linked by two similar cycles.

Figure 1. Surry's model

ACC150F1

The first stage views human beings in their total environment, including all relevant environmental and human parameters. The potential injury agent is also described at this stage. It is assumed that, through the actions (or non-actions) of the individual, dangers grow out of such an environment. For the purpose of analysis a “danger-build-up” cycle is constituted by the first sequence of questions. If there are negative responses to any of these questions, the danger in question will become imminent.

The second sequence of questions, the “danger-release cycle”, links the level of danger to possible alternative outcomes when the danger is triggered. It should be noted that by following different routes through the model, it is possible to distinguish between deliberate (or consciously accepted) dangers and unintentional negative outcomes. The differences between “accident-like” unsafe acts, mishaps (and so on) and completed accidents are also clarified by the model.

 

 

 

 

 

 

The WEF Model

In 1973, a committee set up by the Swedish Work Environment Fund to review the state of occupational accident research in Sweden launched a “new” model and promoted it as a universal tool that should be employed for all research in this field. It was announced as a synthesis of existing behavioural, epidemiological and systems models, and was also said to encompass all relevant aspects of prevention. Reference was made to Surry, among others, but without mention of the fact that the proposed model was almost identical to hers. Only a few changes had been made, all for the purpose of improvement.

As often occurs when scientific models and perspectives are recommended by central agencies and authorities, the model is subsequently adopted in only a few projects. Nevertheless, the report issued by the WEF contributed to a rapidly rising interest in modelling and theory development among Swedish and Scandinavian accident researchers, and several new accident models emerged within a short period.

The point of departure in the WEF model (in contrast to Surry’s “man and environment” level) lies in the concept of danger, here limited to “objective danger” as opposed to the subjective perception of danger. Objective danger is defined as an integral part of a given system, and is basically determined by the amount of resources available for investment in safety. Increasing a system’s tolerance to human variability is mentioned as a way of reducing danger.

When an individual comes into contact with a certain system and its dangers, a process begins. Due to system features and individual behaviour, a risk situation may arise. What is most important (as regards the properties of systems) according to the authors, is how dangers are indicated through various kinds of signals. Risk imminence is determined depending on the individual’s perception, understanding and actions in relation to these signals.

The next sequence in the process, which is in principle identical to Surry’s, is directly related to the event and whether it will lead to injury or not. If the danger is released, can it be, in fact, observed? Is it perceived by the individual in question and is he or she able to avoid injury or damage? Answers to such questions explain the kind and degree of harmful outcomes that emanate from the critical period.

The WEF model (figure 2) was seen as having four advantages:

  • It makes clear that safe working conditions presuppose the taking of action at the earliest possible stage.
  • It illustrates the importance of working with disturbances and near-accidents, as well as those accidents that lead to damage or injury. Actual outcome is of less importance in a preventive perspective.
  • It describes the principles of human information processing.
  • It provides for self-correcting safety systems by means of the feedback of results from studied incidents.

 

Figure 2. The WEF model

ACC150F2

Evaluation and Further Development

By the time the WEF report was issued, an epidemiological study on occupational accidents was under way in the city of Malmö, Sweden. The study was based on a modified version of the so-called Haddon Matrix, which cross-tabulates variables along two dimensions: time in terms of pre-accident, accident and post-accident phases; and the epidemiological trichotomy of host, agent (or vehicle/vector) and environment. Although such a model provides a good basis for data collection, it was found by the research team to be insufficient to understand and explain the causal mechanisms underlying accident and injury phenomena. The WEF model appeared to represent a new approach, and was therefore received with great interest. It was decided to conduct an immediate evaluation of the model by testing it on a random selection of 60 actual cases of occupational accidents that had been previously thoroughly investigated and documented by the Malmö group as a part of its ongoing study.

The results of the evaluation were summarized in four points:

  • The model is not the comprehensive tool it was expected to be. Instead, it should be regarded primarily as a behavioural model. The “danger” is given, and the analysis focuses on the individual’s behaviour in relation to that danger. Consequently, preventive options derived from such analysis are oriented to human factors rather than to equipment or environment. The “danger” as such is hardly questioned within the framework of the model.
  • The model does not take due consideration of technical or organizational constraints in the work process. It creates an illusion of free choice between dangerous and safe alternatives. Some dangers were actually found to be unavoidable by the individual worker, although they were clearly avoidable by management. Hence, it becomes irrelevant and misleading to ask whether people know how to avoid (and choose to avoid) something which is not really avoidable unless they decide to quit their job.
  • The model provides no insight into the important issue of why the dangerous activity was necessary to begin with, and why it was performed by the specific individual. Sometimes dangerous tasks can be made unnecessary; and sometimes they can be performed by other, more appropriate persons with greater skills.
  • The analysis is restricted to a single person, but many accidents occur in interaction between two or more persons. However, it was suggested that this deficiency could be overcome by combining the results of parallel analyses, each made from the perspective of one of the different individuals involved.

 

Based on these remarks, the model was further developed by the research group in Malmö. The most important innovation was the addition of a third sequence of questions to complement the other two. This sequence was designed to analyse and explain the existence and nature of “danger” as an inherent feature of a human-machine system. General principles from systems theory and control technology were applied.

Moreover, the work process, thus understood in terms of human-machine-environment interaction, should also be seen in the light of its organizational and structural contexts at both company and societal levels. The need to take personal characteristics and motives for the actual activity into consideration, as well as for the individual to carry out that activity, was also indicated. (See figure 3.)

Figure 3. The EF model developed by introduction of a new first sequence

ACC150F3

Summary

In reconsidering these early models today, more than twenty years later, against the background of progress made concerning theories and models in accident research, they still seem surprisingly up-to-date and competitive.

The basic underlying assumption of the models—that accidents, as well as their causes, should be seen as deviations from intended processes—is still a dominant perspective (see, inter alia, Benner 1975; Kjellén and Larsson 1981).

The models make a clear distinction between the concept of injury as a health outcome and the concept of accident as a preceding occurrence. Moreover, they demonstrate that an accident is not just an “event”, but rather a process which can be analysed as a series of steps (Andersson 1991).

Many subsequent models have been designed as a number of “boxes”, organized in temporal or hierarchical order, and indicating various temporal phases or levels of analysis. Examples of these include the ISA model (Andersson and Lagerlöf 1983), the deviation model (Kjellén and Larsson 1981) and the so-called Finnish model (Tuominen and Saari 1982). Such levels of analysis are also clearly central to the models described here. But the sequence models also propose a theoretical instrument for analysing the mechanisms which link these levels together. Important contributions in this respect have been made by authors such as Hale and Glendon (1987) from a human factors perspective, and Benner (1975) from a systems point of view.

As clearly emerges when comparing these models, Surry did not give a key position to the concept of danger, as is done in the WEF model. Her starting point was the human-environment interaction, reflecting a broader approach similar to that suggested by the Malmö group. On the other hand, like the WEF committee, she did not refer to any further levels of analysis beyond the worker and environment, such as organizational or societal levels. Further, the comments from the Malmö study cited here in relation to the WEF model also seem relevant to Surry’s model.

A modern synthesis of the three models presented above might include fewer details on human information processing and more information on “upstream” conditions (further back in the casual “flow”) at organizational and societal levels. Key elements in a sequence of questions designed to address the relationship between the organizational and human-machine levels might be derived from modern principles of safety management, involving quality assurance methodologies (internal control and so on). Similarly, a sequence of questions for the connection between societal and organizational levels might involve modern principles of systems-oriented supervision and auditing. A tentative comprehensive model, based on Surry’s original design and including these additional elements, is outlined in figure 4.

Figure 4. Tentative comprehensive model on accident causation (based on Surry 1969 and descendants)

ACC150F4

 

Back

Read 13190 times Last modified on Friday, 19 August 2011 22:58

" DISCLAIMER: The ILO does not take responsibility for content presented on this web portal that is presented in any language other than English, which is the language used for the initial production and peer-review of original content. Certain statistics have not been updated since the production of the 4th edition of the Encyclopaedia (1998)."

Contents

Accident Prevention References

Adams, JGU. 1985. Risk and Freedom; The Record of Read Safety Regulation. London: Transport Publishing Projects.

American National Standards Institute (ANSI). 1962. Method of Recording and Measuring Work Injury Experience. ANSI Z-16.2. New York: ANSI.

—. 1978. American National Standard Manual on Uniform Traffic Control Devices for Streets and Highways. ANSI D6.1. New York: ANSI.

—. 1988. Hazardous Industrial Chemicals—Precautionary Labeling. ANSI Z129.1. New York: ANSI.

—. 1993. Safety Color Code. ANSI Z535.1. New York: ANSI.

—. 1993. Environmental and Facility Safety Signs. ANSI Z535.2. New York: ANSI.

—. 1993. Criteria for Safety Symbols. ANSI Z535.3. New York: ANSI.

—. 1993. Product Safety Signs and Labels. ANSI Z535.4. New York: ANSI.

—. 1993. Accident Prevention Tags. ANSI Z535.5. New York: ANSI.

Andersson, R. 1991. The role of accidentology in occupational accident research. Arbete och halsa. 1991. Solna, Sweden. Thesis.

Andersson, R and E Lagerlöf. 1983. Accident data in the new Swedish information system on occupational injuries. Ergonomics 26.

Arnold, HJ. 1989. Sanctions and rewards: Organizational perspectives. In Sanctions and Rewards in the Legal System:
A Multidisciplinary Approach. Toronto: University of Toronto Press.

Baker, SP, B O’Neil, MJ Ginsburg, and G Li. 1992. Injury Fact Book. New York: Oxford University Press.

Benner, L. 1975. Accident investigations—multilinear sequencing methods. J Saf Res 7.

Centers for Disease Control and Prevention (CDC). 1988. Guidelines for evaluating surveillance systems. Morb Mortal Weekly Rep 37(S-5):1–18.

Davies, JC and DP Manning. 1994a. MAIM: the concept and construction of intelligent software. Saf Sci 17:207–218.

—. 1994b. Data collected by MAIM intelligent software: The first fifty accidents. Saf Sci 17:219-226.

Department of Trade and Industry. 1987. Leisure Accident Surveillance System (LASS): Home and Leisure Accident Research 1986 Data. 11th Annual Report of the Home Accident Surveillance System. London: Department of Trade and Industry.

Ferry, TS. 1988. Modern Accident Investigation and Analysis. New York: Wiley.

Feyer, A-M and AM Williamson. 1991. An accident classification system for use in preventive strategies. Scand J Work Environ Health 17:302–311.

FMC. 1985. Product Safety Sign and Label System. Santa Clara, California: FMC Corporation.

Gielen, AC. 1992. Health education and injury control: Integrating approaches. Health Educ Q 19(2):203–218.

Goldenhar, LM and PA Schulte. 1994. Intervention research in occupational health and safety. J Occup Med 36(7):763–775.

Green, LW and MW Kreuter. 1991. Health Promotion Planning: An Educational and Environmental Approach. Mountainview, CA: Mayfield Publishing Company.

Guastello, SJ. 1991. The Comparative Effectiveness of Occupational Accident Reduction Programs. Paper presented at the International Symposium Alcohol Related Accidents and Injuries. Yverdon-les-Bains, Switzerland, Dec. 2-5.

Haddon, WJ. 1972. A logical framework for categorizing highway safety phenomena and activity. J Trauma 12:193–207.

—. 1973. Energy damage and the 10 countermeasure strategies. J Trauma 13:321–331.

—. 1980. The basic strategies for reducing damage from hazards of all kinds. Hazard Prevention September/October:8–12.

Hale, AR and AI Glendon. 1987. Individual Behaviour in the Face of Danger. Amsterdam: Elsevier.

Hale, AR and M Hale. 1972. Review of the Industrial Accident Research Literature. Research paper No. l, Committee on Safety & Health. London: HMSO.

Hale, AR, B Heming, J Carthey and B Kirwan. 1994. Extension of the Model of Behaviour in the Control of Danger. Vol. 3: Extended Model Description. Sheffield: Health and Safety Executive project HF/GNSR/28.

Hare, VC. 1967. System Analysis: A Diagnostic Approach. New York: Harcourt Brace World.

Harms-Ringdahl, L. 1993. Safety Analysis. Principles and Practice in Occupational Safety. Vol. 289. Amsterdam: Elsevier.

Heinrich, HW. 1931. Industrial Accident Prevention. New York: McGraw-Hill.

—. 1959. Industrial Accident Prevention: A Scientific Approach. New York: McGraw-Hill Book Company.

Hugentobler, MK, BA Israel, and SJ Schurman. 1992. An action research approach to workplace health: Intergrating methods. Health Educ Q 19(1):55–76.

International Organization for Standardization (ISO). 1967. Symbols, Dimensions, and Layout for Safety Signs. ISO R557. Geneva: ISO.

—. 1984. Safety Signs and Colors. ISO 3864. Geneva: ISO.

—. 1991. Industrial Automation Systems—Safety of Integrated Manufacturing Systems—Basic Requirements (CD 11161). TC 184/WG 4. Geneva: ISO.

—. 1994. Quality Management and Quality Assurance Vocabulary. ISO/DIS 8402. Paris: Association française de normalisation.

Janssen, W. 1994. Seat-belt wearing and driving behavior: An instrumented-vehicle study. Accident analysis and prevention. Accident Anal. Prev. 26: 249-261.

Jenkins, EL, SM Kisner, D Fosbroke, LA Layne, MA Stout, DN Castillo, PM Cutlip, and R Cianfrocco. 1993. Fatal Injuries to Workers in the United States, 1980–1989: A Decade of Surveillance. Cincinnati, OH: NIOSH.

Johnston, JJ, GTH Cattledge, and JW Collins. 1994. The efficacy of training for occupational injury control. Occup Med: State Art Rev 9(2):147–158.

Kallberg, VP. 1992. The Effects of Reflector Posts on Driving Behaviour and Accidents on Two-lane Rural Roads in Finland. Report 59/1992. Helsinki: The Finnish National Road Administration Technical Development Center.

Kjellén, U. 1984. The deviation concept in occupational accident control. Part I: Definition and classification; Part II: Data collection and assesment of significance. Accident Anal Prev 16:289–323.

Kjellén, U and J Hovden. 1993. Reducing risks by deviation control—a retrospection into a research strategy. Saf Sci 16:417–438.

Kjellén, U and TJ Larsson. 1981. Investigating accidents and reducing risks—a dynamic approach. J Occup Acc 3:129–140.

Last, JM. 1988. A Dictionary of Epidemiology. New York: Oxford University Press.

Lehto, MR. 1992. Designing warning signs and warning labels: Part I—Guidelines for the practitioner. Int J Ind Erg 10:105–113.

Lehto, MR and D Clark. 1990. Warning signs and labels in the workplace. In Workspace, Equipment and Tool Design, edited by A Mital and W Karwowski. Amsterdam: Elsevier.

Lehto, MR and JM Miller. 1986. Warnings: Volume I: Fundamentals, Design, and Evaluation Methodologies. Ann Arbor, MI: Fuller Technical Publications.
Leplat, J. 1978. Accident analyses and work analyses. J Occup Acc 1:331–340.

MacKenzie, EJ, DM Steinwachs, and BS Shankar. 1989. Classifying severity of trauma based on hospital discharge diagnoses: Validation of an ICD-9CM to AIS-85 conversion table. Med Care 27:412–422.

Manning, DP. 1971. Industrial accident-type classifications—A study of the theory and practice of accident prevention based on a computer analysis of industrial injury records. M.D. Thesis, University of Liverpool.

McAfee, RB and AR Winn. 1989. The use of incentives/feedback to enhance work place safety: A critique of the literature. J Saf Res 20:7-19.

Mohr, DL and D Clemmer. 1989. Evaluation of an occupational injury intervention in the petroleum industry. Accident Anal Prev 21(3):263–271.

National Committee for Injury Prevention and Control. 1989. Injury Prevention: Meeting the Challenge. New York: Oxford University Press.

National Electronic Manufacturers Association (NEMA). 1982. Safety Labels for Padmounted Switch Gear and Transformers Sited in Public Areas. NEMA 260. Rosslyn, VA: NEMA.

Occupational Health and Safety Administration (OSHA). 1985. Specification for Accident Prevention Signs and Tags. CFR 1910.145. Washington DC: OSHA.

—. 1985. [Chemical] Hazard Communication. CFR 1910.1200. Washington DC: OSHA.

Occupational Injury Prevention Panel. 1992. Occupational injury prevention. In Centers for Disease Control. Position Papers from the Third National Injury Control Conference: Setting the National Agenda for Injury Control in the 1990s. Atlanta, GA: CDC.

Organization for Economic Cooperation and Development (OECD). 1990. Behavioural Adaptation to Changes in the Road Transport System. Paris: OECD.

Rasmussen, J. 1982. Human errors. A taxonomy for describing human malfunction in industrial installations. J Occup Acc 4:311–333.

Rasmussen, J, K Duncan and J Leplat. 1987. New Technology and Human Error. Chichester: Wiley.

Reason, JT. 1990. Human Error. Cambridge: CUP.

Rice, DP, EJ MacKenzie and associates. 1989. Cost of Injury in the United States: A Report to Congress. San Francisco: Institute for Health and Aging, University of California; and Baltimore: Injury Prevention Center, The Johns Hopkins University.

Robertson, LS. 1992. Injury Epidemiology. New York: Oxford University Press.

Saari, J. 1992. Successful implementation of occupational health and safety programs in manufacturing for the 1990s. J Hum Factors Manufac 2:55–66.

Schelp, L. 1988. The role of organizations in community participation—prevention of accidental injuries in a rural
Swedish municipality. Soc Sci Med 26(11):1087–1093.

Shannon, HS. 1978. A statistical study of 2,500 consecutive reported accidents in an automobile factory. Ph.D. thesis, University of London.

Smith, GS and H Falk. 1987. Unintentional injuries. Am J Prev Medicine 5, sup.:143–163.

Smith, GS and PG Barss. 1991. Unintentional injuries in developing countries: The epidemiology of a neglected problem. Epidemiological Reviews :228–266.

Society of Automotive Engineers (SAE). 1979. Safety Signs. SAE J115: SAE.

Steckler, AB, L Dawson, BA Israel, and E Eng. 1993. Community health development: An overview of the works of Guy W. Stewart. Health Educ Q Sup. 1: S3-S20.

Steers, RM and LW Porter.1991. Motivation and Work Behavior (5th ed). New York: McGraw-Hill.

Surry, J. 1969. Industrial Accident Research: A Human Engineering Appraisal. Canada: University of Toronto.

Tollman, S. 1991. Community-oriented primary care: Origins, evolutions, applications. Soc Sci Med 32(6):633-642.

Troup, JDG, J Davies, and DP Manning. 1988. A model for the investigation of back injuries and manual handling problems at work. J Soc Occup Med 10:107–119.

Tuominen, R and J Saari. 1982. A model for analysis of accidents and its applications. J Occup Acc 4.

Veazie, MA, DD Landen, TR Bender and HE Amandus. 1994. Epidemiologic research on the etiology of injuries at work. Ann Rev Pub Health 15:203–21.

Waganaar, WA, PT Hudson and JT Reason. 1990. Cognitive failures and accidents. Appl Cogn Psychol 4:273–294.

Waller, JA. 1985. Injury Control: A Guide to the Causes and Prevention of Trauma. Lexington, MA: Lexington Books.

Wallerstein, N and R Baker. 1994. Labor education programs in health and safety. Occup Med State Art Rev 9(2):305-320.

Weeks, JL. 1991. Occupational health and safety regulation in the coal mining industry: Public health at the workplace. Annu Rev Publ Health 12:195–207.

Westinghouse Electric Corporation. 1981. Product Safety Label Handbook. Trafford, Pa: Westinghouse Printing Division.

Wilde, GJS. 1982. The theory of risk homeostasis: Implications for safety and health. Risk Anal 2:209-225.

—. 1991. Economics and accidents: A commentary. J Appl Behav Sci 24:81-84.

—. 1988. Risk homeostasis theory and traffic accidents: propositions, deductions and discussion of dissemsion in recent reactions. Ergonomics 31:441-468.

—. 1994. Target Risk. Toronto: PDE Publications.

Williamson, AM and A-M Feyer. 1990. Behavioural epidemiology as a tool for accident research. J Occup Acc 12:207–222.

Work Environment Fund [Arbetarskyddsfonden]. 1983. Olycksfall i arbetsmiljön—Kartläggning och analys av forskningsbehov [Accidents in the work environment—survey and analysis]. Solna: Arbetarskyddsfonden