Saturday, 12 March 2011 17:38

Physical Load

Rate this item
(1 Vote)

Manual Forest Work

Workload. Manual forest work generally carries a high physical workload. This in turn means a high energy expenditure for the worker. The energy output depends on the task and the pace at which it is performed. The forest worker needs a much larger food intake than the “ordinary” office worker to cope with the demands of the job.

Table 1 presents a selection of jobs typically performed in forestry, classified into categories of workload by the energy expenditure required. The figures can give only an approximation, as they depend on body size, sex, age, fitness and work pace, as well as on tools and working techniques. It does, however, give a broad indication that nursery work is generally light to moderate; planting work and harvesting with a chain-saw moderate to heavy; and manual harvesting heavy to very heavy. (For case-studies and a detailed discussion of the workload concept applied to forestry see Apud et al. 1989; Apud and Valdés 1995; and FAO 1992.)

Table 1. Energy expenditure in forestry work.


Kj/min/65 kg man    

Workload capacity





Work in forestry nursery

Cultivating tree plants




















Clearing draining ditches with spade





Tractor driving/harrowing while sitting





Planting by hand





Planting by machine





Work with axe-Horizontal and perpendicular blows

Weight of axe head

Rate (blows/min)




1.25 kg





0.65-1.25 kg





Felling, trimming, etc. with hand tools






Carrying logs





Dragging logs





Work with saw in forest

Carrying power saw





Cross-cutting by hand





Horizontal-sawing power saw





Mechanized logging





Operating harvester/forwarder





Fuelwood preparation

Sawing small logs by hand





Cleaving wood





Dragging firewood





Stacking firewood





L = Light; M = Moderate; H = Heavy; VH = Very heavy; EH = Extremely heavy

Source: Adapted from Durnin and Passmore 1967.

Musculoskeletal strain. Manual piling involves repeated heavy lifting. If the working technique is not perfect and the pace too high, the risk of musculoskeletal injuries (MSIs) is very high. Carrying heavy loads over extended periods of time, such as in pulpwood harvesting or fuelwood harvesting and transport, has a similar impact.

A specific problem is the use of maximum body force, which could lead to sudden musculoskeletal injuries in certain situations. An example is bringing down a badly hung-up tree by using a felling lever. Another is “saving” a falling log from a pile.

The work is done using only muscle force, and most often it involves dynamic and not simply repetitive use of the same muscle groups. It is not static. The risk for repetitive strain injuries (RSIs) is usually small. However, working in awkward body positions can create problems such as low-back pain. An example is using an axe to delimb trees which are lying on the ground, which requires working bent over for long periods of time. This puts great strain on the lower back and also means that the muscles in the back do static work. The problem can be reduced by felling trees across a stem that is already on the ground, thus using it as a natural workbench.

Motor-Manual Forest Work

The operation of portable machines such as chain-saws may require even greater energy expenditure than manual work, because of their considerable weight. In fact, the chain-saws used are often too big for the task at hand. Instead, the lightest model and the smallest guide bar possible should be used.

Whenever a forest worker who uses machines also does the piling manually, he or she is exposed to the problems described above. Workers have to be instructed to keep the back straight and to rely on the big muscles in the legs to lift loads.

The work is done using machine power and is more static than manual work. The operator’s work consists of choosing, moving and holding the machine in the right position.

Many of the problems created originate from working at a low height. Delimbing a tree that is lying flat on the ground means working bent over. This is a similar problem to that described in manual forest work. The problem is compounded when carrying a heavy chain-saw. Work should be planned and organized so the working height is close to the hip of the forest worker (e.g., using other trees as “workbenches” for delimbing, as described above). The saw should be supported by the stem as much as possible.

Highly specialized motor-manual work tasks create very high risk for musculoskeletal injuries since the work cycles are short and the specific movements are repeated many times. An example is the fellers working with chain-saws ahead of a processor (delimbing and cutting). Most of these forest workers that were studied in Sweden had neck and shoulder problems. Doing the whole logging operation (felling, delimbing, crosscutting and certain not-too-heavy piling) means the job is more varied and the exposure to specific unfavourable static, repetitive work is reduced. Even with the appropriate saw and a good working technique, chain-saw operators should not work more than 5 hours a day with the saw running.

Machine Work

The physical workloads in most forest machines are very low compared to manual or motor-manual work. The machine operator or the mechanic is still sometimes exposed to heavy lifting during maintenance and repairs. The operator’s work consists of guiding the movements of the machine. He or she controls the force to be exerted by handles, levers, buttons and so on. The work cycles are very short. The work for the most part is repetitive and static, which can lead to a high risk for RSIs in the neck, shoulder, arm, hand or finger regions.

In machinery from the Nordic countries the operator works only with very small tensions in the muscles, using mini–joy sticks, sitting in an ergonomic seat with armrests. But still RSIs are a major problem. Studies show that between 50 and 80% of machine operators have neck or shoulder complaints. These figures are often difficult to compare since the injuries develop gradually over a long period of time. The results depend on the definition of injury or complaints.

Repetitive strain injuries depend on many things in the work situation:

Degree of tension in the muscle. A high static or repeated, monotonous muscle tension can be caused, for example, by using heavy controls, by awkward working positions or whole-body vibrations and shocks, but also by high mental stress. Stress can be generated by high concentration, complicated decisions or by the psychosocial situation, such as lack of control over the work situation and relations with supervisors and workmates.

Time of exposure to static work. Continuous static muscle tensions can be broken only by taking frequent pauses and micropauses, by changing work tasks, by job rotation and so on. A long total exposure to monotonous, repetitive work movements over the years increases the risk of RSIs. The injuries appear gradually and may be irreversible when manifested.

Individual status (“resistance”). The “resistance” of the individual changes over time and depends on his or her inherited predisposition and physical, psychological and social status.

Research in Sweden has shown that the only way to reduce these problems is by working with all these factors, especially through job rotation and job enlargement. These measures decrease the time of exposure and improve the well-being and psychosocial situation of the worker.

The same principles can be applied to all forest work—manual, motor-manual or machine work.

Combinations of Manual, Motor-Manual and Machine Work

Combinations of manual and machine work without job rotation always mean that the work tasks become more specialized. An example is the motor-manual fellers working ahead of a processor which is delimbing and cutting. The work cycles for the fellers are short and monotonous. The risk of MSIs and RSIs is very high.

A comparison between chain-saw and machine operators was made in Sweden. It showed that the chain-saw operators had higher risks of MSIs in the low back, knees and hip as well as high risks of hearing impairment. The machine operators on the other hand had higher risks of RSIs in the neck and shoulders. The two types of work were subject to very different hazards. A comparison with manual work would probably show still another risk pattern. Combinations of different types of work tasks using job rotation and job enlargement give possibilities to reduce the time of exposure for many specific hazards.



Read 7433 times Last modified on Wednesday, 07 September 2011 18:33

" DISCLAIMER: The ILO does not take responsibility for content presented on this web portal that is presented in any language other than English, which is the language used for the initial production and peer-review of original content. Certain statistics have not been updated since the production of the 4th edition of the Encyclopaedia (1998)."


Forestry References

Apud, E, L Bostrand, I Mobbs, and B Strehlke. 1989. Guidelines on Ergonomic Study in Forestry. Geneva: ILO.

Apud, E and S Valdés. 1995. Ergonomics in Forestry—The Chilean Case. Geneva: ILO.

Banister, E, D Robinson, and D Trites. 1990. Ergonomics of Tree Planting. Canada–British Columbia Forest Resources Development Agreement, FRDA Report 127. Victoria, BC: FRDA.

Brown, GW. 1985. Forestry and Water Quality. Corvallis, OR: Oregon State University (OSU) Book Stores Inc.

Chen, KT. 1990. Logging Accidents—An Emerging Problem. Sarawak, Malaysia: Occupational Health Unit, Medical Department.

Dummel, K and H Branz. 1986. “Holzernteverfahren,” Schriften Reihefdes Bundesministers für Ernätrung, Handwirtschaft und Forsten. Reihe A: Landwirtschafts verlag Münster-Hiltrup.

Durnin, JVGA and R Passmore. 1967. Energy, Work, Leisure. London: Heinemann.

Food and Agriculture Organization (FAO) of the United Nations. 1992. Introduction to Ergonomics in Forestry in Developing Countries. Forestry Paper 100. Rome:FAO.

—. 1995. Forestry—Statistics Today for Tomorrow. Rome: FAO.

—. 1996. FAO Model Code of Forest Harvesting Practice. Rome: FAO.

FAO/ECE/ILO. 1989. Impact of Mechanization of Forest Operations on the Soil. Proceedings of a seminar, Louvain-la-neuve, Belgium, 11–15 September. Geneva: FAO/ECE/ILO Joint Committee on Forest Technology, Management and Training.

—. 1991. The Use of Pesticides in Forestry. Proceedings of a seminar, Sparsholt, UK, 10–14 September 1990.

—. 1994. Soil, Tree, Machine Interactions, FORSITRISK. Proceedings of an interactive workshop and seminar, Feldafiraf, Germany, 4–8 July. Geneva: FAO/ECE/ILO Joint Committee on Forest Technology, Management and Training.

—. 1996a. Manual on Acute Forest Damage. UN/ECE/ FAO discussion papers ECE/TIM/DP/7, New York and Geneva: Joint FAO/ECE/ILO Committee on Forest Technology, Management and Training.

—. 1996b. Skills and Training in Forestry—Results of a Survey of ECE Member Countries. Geneva: FAO/ECE/ILO Joint Committee on Forest Technology, Management and Training.

FAO/ILO. 1980. Chainsaws in Tropical Forests. Forest Training Series No. 2. Rome: FAO.

Gellerstedt, S. 1993. Work and Health in Forest Work. Göteborg: Chalmers University of Technology.

Giguère, D, R Bélanger, J-M Gauthier, and C Larue. 1991. Étude préliminaire du travail de reboisement. Rapport IRSST B-026. Montreal: IRSST.

—. 1993. Ergonomics aspects of tree planting using multi-pot technology. Ergonomics 36(8):963-972.

Golsse, JM. 1994. Revised FERIC Ergonomic Checklist for Canadian Forest Machinery. Pointe Claire: Forest Engineering Research institute of Canada.

Haile, F. 1991. Women Fuelwood Carriers in Addis Ababa and the Peri-urban Forest. Research on women in fuelwood transport in Addis Ababa, Ethiopia ETH/88/MO1/IRDC and ETH/89/MO5/NOR. Project report. Geneva: ILO.

Harstela, P. 1990. Work postures and strain of workers in Nordic forest work: A selective review. Int J Ind Erg 5:219–226.

International Labour Organization (ILO). 1969. Safety and Health in Forestry Work. An ILO Code of Practice. Geneva: ILO.

—. 1988. Maximum Weights in Load Lifting and Carrying. Occupational Safety and Health Service, No. 59. Geneva: ILO.

—. 1991. Occupational Safety and Health in Forestry. Report II, Forestry and Wood Industries Committee, Second Session. Geneva: ILO.

—. 1997. Code of Practice on Safety and Health in Forest Work. MEFW/1997/3. Geneva: ILO.

—. 1998. Code of Practice on Safety and Health in Forest Work. Geneva: ILO.

International Standards Organization (ISO). 1986. Equipment for Working the Soil: ROPS—Laboratory Testing and Performance Specifications. ISO 3471-1. Geneva: ISO.

Jokulioma, H and H Tapola. 1993. Forest worker safety and health in Finland. Unasylva 4(175):57–63.

Juntunen, ML. 1993. Training of harvester operations in Finland. Presented in seminar on the use of multifunctional machinery and equipment in logging operations. Olenino Logging Enterprise, Tvor Region, Russian Federation 22–28 August.

—. 1995. Professional harvester operator: Basic knowledge and skills from training—Operating skills from working life? Presented in IUFRO XX World Congress, Tampre, Finland, 6–12 August.

Kanninen, K. 1986. The occurrence of occupational accidents in logging operations and the aims of preventive measures. In the proceedings of a seminar on occupational health and rehabilitation of forest workers, Kuopio, Finland, 3–7 June 1985. FAO/ECE/ILO Joint Committee on Forest Working Techniques and Training of Forest Workers.

Kastenholz, E. 1996. Sicheres Handeln bei der Holzernteuntersuchung von Einflüssen auf das Unfallgeschehen bei der Waldarbeit unter besonderer Berücksichtigung der Lohnform. Doctoral dissertation. Freiburg, Germany: University of Freiburg.

Kantola, M and P Harstela. 1988. Handbook on Appropriate Technology for Forestry Operations in Developing Counties, Part 2. Forestry Training Programme Publication 19. Helsinki: National Board of Vocational Education.

Kimmins, H. 1992. Balancing Act—Environmental Issues in Forestry. Vancouver, BC: University of British Columbia Press.

Lejhancova, M. 1968. Skin damage caused by mineral oils. Procovni Lekarstvi 20(4):164–168.

Lidén, E. 1995. Forest Machine Contractors in Swedish Industrial Forestry: Significance and Conditions during 1986–1993. Department of Operational Efficiency Report No. 195. Swedish University of Agricultural Science.

Ministry of Skills Development. 1989. Cutter-skidder Operator: Competency-based Training Standards. Ontario: Ministry of Skills Development.

Moos, H and B Kvitzau. 1988. Retraining of adult forest workers entering forestry from other occupation. In Proceedings of Seminar on the Employment of Contractors in Forestry, Loubières, France 26-30 September 1988. Loubiéres: FAO/ECE/ILO Joint Committee on Forest Work Techniques and Training of Forest Workers.

National Proficiency Test Council (NPTC) and Scottish Skill Testing Service (SSTS). 1992. Schedule of Chainsaw Standards. Warwickshire, UK: NPTC and SSTS.

—. 1993. Certificates of Competence in Chainsaw Operation. Warwickshire, United Kingdom: National Proficiency Tests Council and Scottish Skills Testing Service.

Patosaari, P. 1987. Chemicals in Forestry: Health Hazards and Protection. Report to the FAO/ECE/ILO Joint Committee on Forest Working Technique and Training of Forest Workers, Helsinki (mimeo).

Pellet. 1995. Rapport d’étude: L’ánalyse de l’áccident par la méthode de l’arbre des causes. Luzern: Schweizerische Unfallversicherungsanstalt (SUVA) (mimeo).

Powers, RF, DH Alban, RE Miller, AE Tiarks, CG Wells, PE Avers, RG Cline, RO Fitzgerald, and JNS Loftus. 1990.
Sustaining site productivity in North American forests: Problems and prospects. In Sustained Productivity of Forest Soils, edited by SP Gessed, DS Lacate, GF Weetman and RF Powers. Vancouver, BC: Faculty of Forestry Publication.

Robinson, DG, DG Trites, and EW Banister. 1993. Physiological effects of work stress and pesticides exposure in tree planting by British Columbian silviculture workers. Ergonomics 36(8):951–961.

Rodero, F. 1987. Nota sobre siniestralidad en incendios forestales. Madrid, Spain: Instituto Nacional para la Conservación de la Naturaleza.

Saarilahti, M and A Asghar. 1994. Study on winter planting of chir pine. Research paper 12, ILO project, Pakistan.
Skoupy, A and R Ulrich. 1994. Dispersal of chain lubrication oil in one-man chain-saws. Forsttechnische Information 11:121–123.

Skyberg, K, A Ronneberg, CC Christensen, CR Naess-Andersen, HE Refsum, and A Borgelsen. 1992. Lung function and radiographic signs of pulmonary fibrosis in oil exposed workers in a cable manufacturing company: A follow up study. Brit J Ind Med 49(5):309–315.

Slappendel, C, I Laird, I Kawachi, S Marshal, and C Cryer. 1993. Factors affecting work-related injury among forestry workers: A review. J Saf Res 24:19–32.

Smith, TJ. 1987. Occupational characteristics of tree-planting work. Sylviculture Magazine II(1):12–17.

Sozialversicherung der Bauern. 1990. Extracts from official Austrian statistics submitted to the ILO (unpublished).

Staudt, F. 1990. Ergonomics 1990. Proceedings P3.03 Ergonomics XIX World Congress IUFRO, Montreal, Canada, August 1990. The Netherlands: Department of Forestry, Section Forest Technique and Woodscience, Wageningen Agricultural University.

Stjernberg, EI. 1988. A Study of Manual Tree Planting Operations in Central and Eastern Canada. FERIC technical report TR-79. Montreal: Forest Engineering Research Institute of Canada.

Stolk, T. 1989. Gebruiker mee laten kiezen uit persoonlijke beschermingsmiddelen. Tuin & Landschap 18.

Strehlke, B. 1989. The study of forest accidents. In Guidelines on Ergonomic Study in Forestry, edited by E Apud. Geneva: ILO.

Trites, DG, DG Robinson, and EW Banister. 1993. Cardiovascular and muscular strain during a tree planting season among British Columbian silviculture workers. Ergonomics 36(8):935–949.

Udo, ES. 1987. Working Conditions and Accidents in Nigerian Logging and Sawmilling Industries. Report for the ILO (unpublished).

Wettman, O. 1992. Securité au travail dans l’exploitation forestière en Suisse. In FAO/ECE/ILO Proceedings of Seminar on the Future of the Forestry Workforce, edited by FAO/ECE/ILO. Corvallis, OR: Oregon State University Press.